3D Printed Parts and Files from MaxWaxPax
I will be creating more and more 3D printed designs for the fi-8170 as well as other scanners. I will also be working on some ideas for stands, displays, and various other things. If you think of something you would like for me to design, please let me know.
fi-8170 feeder arm V3 (fix for tab sticking) - 06/10/24
- Click here if you would like to purchase this item from us. If you wish to print the file, you can find all the printing information below.
- Click here to download the STL
- note* The image is 10X the normal size. When you are going to print, reduce the image to 1/10 or 10%.
- note* The v3 has been updated to fix potential issue with piece sticking to the plastic tab in the enclosure on the fi-8170.
- This fix works best with sleeved cards.
- You will need a push pin or something similar to feed through the hole to keep this in place
- Remove both original "feeder arms". Make sure to save them and save the springs. You will use one of the springs for this print.
- Insert the new printed piece and use the push pin to anchor it. Close it up and you are good to go.
- Click here to watch the installation video
fi-8170 feeder wheel V1 (to replace middle wheel) - 06/01/24
- Click here to download the STL
- note* The image is 10X the normal size. When you are going to print, reduce the image to 1/10 or 10%.
- This is for testing only. I have made some variations of this and so far it seems to be helping with certain scans. More details to come.
- This print would only replace the middle wheel. I am working to see if it is necessary to have both. I will post shortly.
- Video Instructions link to be posted today by 6pm CST (06/01/24)
-